Drilling glass with a dremel tool

Color Code: Burgundy Overall Length: 1. Dremel Sanding Band Dremel Sanding Disc Flexible Scraper Blade MM Dremel Engraving Bit Dremel Piloted Beading Router Dremel Chamfer Router Dremel Corner Rounding Router Dremel V-Groove Router Dremel Straight Router Dremel Aluminum Oxide Grinding Wheel Dremel Chainsaw Sharpening Grinding Stone Dremel Aluminum Oxide Abrasive Wheel Dremel Abrasive Point Dremel Aluminum Oxide Grinding Stone Dremel Accessory Kit Universal Adapter MM Make More with Dremel.

STEPS 3. Maker Photos. As you cut through the material, make sure that you remove debris from the workstation. Having a clean work space helps ensure your safety; you are less likely to breathe in dangerous materials. You should make sure that the glass is fully secured before you start cutting it. If it breaks, you need to wear gloves while cleaning it up.

You will want to ensure you are using the best bit for the situation. There are dremel bits made to cut through several different materials, such as wood or even plastic. However, using a glass bit is going to give you the advantage. To install the bit, insert into the end of your dremel and tighten it. You want to be sure that it is secured. Then, you are ready to go. Glass is a very fragile material. You want to be sure you are using the proper dremel bits.

Any diamond coated bit is going to give you better results than a solid metal bit. You can use larger sizes if you want. Although, you will want to make sure that you work slower with them.

The larger the dremel bit, the slower you should go. The bigger sizes risk overheating much sooner. Finally, you always want to use a diamond dremel bit when working with glass. The diamond coating allows the cut to be smooth and quick.

Without it, you risk cracking the glass. When using a hole cutting drill bit, you can follow many of the same steps to drill holes in other types of materials. You can not draw on glass without the mark rubbing off right away.

Stick the piece of tape to the bottle where you plan on drilling. Make sure to measure accurately, then write on the masking tape with your marker. Plus, masking tape is great for writing on, making it a good choice. You need to use a permanent marker for the next step. Put the glass under a slow stream of running water. Then, you can start making your hole. The water prevents glass dust from getting into the air and also helps the dremel to stay at a good temperature.

Make sure that you keep the cord on your dremel out of the stream. Now, gently push the dremel bit through the marks you made on the masking tape.

Drilling the hole through the glass should go smoothly at this point. It will be like drilling into other materials. Next, you will need to deal with the rough edges on your glass piece. You will need a diamond file with grit to remove the burs completely. As you sand , make sure you use a light touch. If you work too hard, the glass can break.