Sony str dn1000 owners manual

Color" and "x. Color" logo are trademarks of Sony Cor-. Published by Sony Techno Create Corporation. Models of area code U only. With 8 ohm loads, both channels driven, from. Amplifier section. Canadian Model. Australian Model. Measured under the following conditions:. Power requirements. Reference power output for front, center, surround.

Depending on the. Digital Coaxial Impedance: 75 ohms. Previous Page. Page 89 Makes the measurement of frequency from each speaker flat. Sets the frequency characteristics to a set that matches that of the Sony listening room standard. Adjusts the characteristics of all the speakers to match the characteristics of the front speaker.

Display Explanation : IN Play back a connected component. Use the screws that you removed from step 1 to fasten the wireless transmitter. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level.

Prepare the playback component for playing. For example, insert the video tape you want to copy into the VCR. Prepare the recording component. Page Using The Remote You can control Sony or non-Sony components you are using with the remote supplied with the receiver. The remote is initially set to control Sony components.

When you change the settings of the remote according to the components you are using, Before you begin, note that: — Page Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a Page Additional Information Digital Cinema Sound DCS Unique sound reproduction technology for home theater developed by Sony, in cooperation with Sony Pictures Entertainment, for enjoying the exciting and powerful sound of movie theaters at home.

Page x Dolby Digital Plus Dolby Digital Plus provides the flexibility and efficiency to deliver more channels of compelling surround sound for high-definition video media.

Its superior coding efficiencies enable up to 7. This format consists of a core and an extension, and the core part has DTS Digital Surround compatibility. Page Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. Page There is no sound from a specific component.

Page There is no sound from the subwoofer. Page Video There is no picture or an unclear picture appears on the TV screen. Page Specifications Sony dealer. Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide sony str — dn manual help you remedy the problem.

Press or b to enter the parameter. The autosetup worked OK, but the default setting of having dynamic range compression on is troublesome. For example, insert the video tape you want to copy into the VCR. The remote is initially set to control Sony components.

This function can be used with other sound fields. This format consists of a core and an extension, and the core part has DTS Digital Surround compatibility. Prepare the playback component for playing.

Use the screws that manuao removed from step 1 to fasten the wireless transmitter. Its superior coding efficiencies enable up to 7.

This technology reproduces true-to-life audio the way the director intended. Unleaded solder is more viscous sticky, less prone to fl ow than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.

When this part on the DSP board is damaged, exchange the entire mounted board. If there is a malfunction, the display shows a message. You can check the condition of the system by the message. See the following table to solve the problem. If any problem persists, consult your nearest Sony dealer.

Irregular current is output to the speakers, or upper panel of the receiver is covered with something. The receiver will automatically turn off after a few seconds.

Check the speaker connection and turn on the power again. However, note that all memorized settings will be reset to their initial settings and you will have to readjust all settings on the receiver. Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.

Be sure to use the buttons on the receiver for this operation. All the settings you have changed or adjusted are reset to the initial settings. Performing initial setup operations.