Pure evoke 2xt software

You may want to re-tune the unit at a later date if you move the unit to a different room or if you want to receive a newly introduced multiplex — see Retuning your unit on page 7. A progress indicator on the display shows that autotune is underway. If stations are found during the autotune The stations will be stored in alphanumeric order. The first station on the list will be selected and you will hear it through the speakers. To listen to other stations, see Selecting a station on page 8.

Use the Tune knob to scroll through the following options and push it to select that option. Autotune local - See Retuning your unit below for details of the local autotune option. Autotune full - See Retuning your unit below for details of the full autotune option. Retuning your unit You can re-tune your unit at any time using the autotune process. You may wish to do this if a new multiplex is launched or you move your unit to another room.

You do not need to perform an autotune to pick up new stations within a multiplex you are listening to as your EVOKE-2 monitors and refreshes the list of available stations automatically.

The following two options are available: Autotune local - scans all frequencies in the UK channel allocation. This should only take a few seconds. Autotune full - scans the full range of digital frequencies in Band III. This may take a minute or more. Push and release the Autotune button once for local scan or hold down for around two seconds for a full scan.

Note You can cancel Autotune by pushing the Autotune button again during the tuning process. The display will indicate tuning is underway. When finished, the EVOKE-2 will return to the station you were listening to and you will hear it through the speakers.

All the DAB stations found are now stored in the unit and you can select another station as described in Selecting a station on page 8. Check your aerial is fully extended and try one of the available tuning options.

Push the Tune button to switch between manual and seek tuning. Seek Tuning - turn the Tune knob in the direction you want to search.

EVOKE-2 stops at the first station it finds. Repeat to find the next station. Manual Tuning - turn the Tune knob until you reach the frequency to which you want to listen. The frequency changes in steps of 0. If you have assigned stations to presets you can also select them directly by pressing the relevant numbered button , see Storing and recalling presets on page The top line of the display shows the name of the currently selected station.

Rotate the Tune knob to see the names of other stored stations on the bottom line of the display. Stop when you find the station to which you want to listen. Push and release the Tune knob to listen to the station you have selected. See page 14 for information on primary and secondary services. A flashing cursor will indicate that this is underway. If you want to try to manually tune to this station you have five seconds after the message in which to push the Tune knob and the tuning aid will be displayed enabling you to adjust your aerial, see page 12 for details.

Selecting a station in FM mode To select a station in FM, simply tune to the required frequency using one of the tuning methods described in Tuning in FM mode on page 7. Press the Display button and repeat to cycle through the six different display modes. Program Type A label describing the type of content being broadcast by the service. Multiplex name Displays the name of the multiplex in which the current service is found, see Guide to Digital Radio on page 14 for more information on multiplexes.

Date and time Displays the date and time obtained from the current multiplex. Storing and recalling presets The numbered buttons enable you to store radio stations for one-touch access. To store a station You can store a station to a preset while listening to it or, in DAB mode only, when you see the station name on the bottom line of the display while scrolling through the station list.

Press and hold down a numbered button for around two seconds to store the station under that number. For example, if you're listening to some BBC digital stations you can scroll the news headlines across the display while you listen to the radio. If you're a keen cook you'll like the kitchen timer, which enables you to set a countdown timer so that you don't burn the dinner.

The Evoke also boasts a normal alarm clock that can wake you with the radio or by playing a tone. The menu also enables you to set options such as the display brightness, the station order and how the autotune feature should operate. The ability to connect an iPod or MiniDisc is a nice touch that means you don't need to buy an expensive iPod docking station, and the hour battery life means that your iPod will run out of puff long before the Evoke-2XT does.

You also get a digital output and a line out so that you can connect the unit to your existing home stereo setup, although we found that the Evoke-2XT was loud enough to fill even the largest room without additional speakers. Performance We encountered a problem with our pre-production Evoke-2XT within seconds of finding our first radio station: the sound appeared and disappeared, apparently at random.

The culprit turned out to be a faulty volume dial. Once that was sorted out, the Evoke-2XT produced a warm, detailed sound with tight, punchy bass and crystal-clear treble. It's particularly good with speech -- listening to Wogan is like having your ears licked by a spaniel -- but whether you're listening to Classic FM or Kerrang! It looks simple and pragmatic: buttons are where they should be, while the display is a decent size and easy to read even when you're bleary-eyed at breakfast.

Mains or battery operated via standard batteries or an optional rechargeable ChargePak , the '2 XT also offers a clock, alarm, headphone socket and line and digital outputs.

Sonically, the Evoke-2XT is noticeably broader and more authoritative than its smaller Evoke-1 stablemates — thanks in no small part to the stereo speakers — and offers bags of insight and bass without ever losing its balance. What Hi-Fi? Our comprehensive tests help you buy the very best for your money, with our advice sections giving you step-by-step information on how to get even more from your music and movies.

Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Evoke-2XT - User Guide. Warranty information Imagination Technologies Ltd. This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us. Copyright Copyright by Imagination Technologies Limited.

Disclaimer Imagination Technologies Limited makes no representation or warranties with respect to the content of this document and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Safety instructions Keep the radio away from heat sources. Do not use the radio near water. Avoid objects or liquids getting into the radio. Do not remove screws from or open the radio casing. Use only the supplied 9V power adapter if connecting the radio to the mains.

Front panel - controls Tone Turn to adjust tone from low more bass to high more treble Volume Turn to adjust the volume Volume Tone Tune Light 1 2 3 Press to turn backlight on for 10 seconds 4 5 6 Standby Light Info Menu Press to switch between on and standby using mains.

Press and repeat to change the text shown on the bottom of the display. Timer Press and use Tune to set a countdown timer which will sound an alarm after the period you set from 1 min to 23 hrs 59 mins.

Tune Turn to scroll through and then press to select stations and menu options. Presets Press and hold for 2 seconds to store a preset.